Two component waterborne clear sealer featuring a high level insulating capacity, excellent coverage, good sandability and ease of application. The most important feature of this sealer is that it minimizes problems of overlapping. AQUA TENAX has been formulated to give a pleasant shade to the wood without causing unwanted changes to the colour of those woods rich in tannin and other water soluble staining substances (oak, teak…). For this reason, it is recommended especially for difficult woods such as IPE LAPACHO when browning or reddening would be undesirable. Thanks to its high level of solid content, AQUA TENAX can be used in combination with the two component finishes in the INNOVATION range, to carry out two coat finishing cycles.

Two component polyurethane waterborne clear finish. In the “natural wood effect” version, IDRO 2K confers a natural appearance to floors together with a uniformity and cleanliness that can only be compared to the results achieved with impregnation cycles with oil and/or wax. Apart from these features regarding appearance, IDRO 2K combines qualities of resistance to abrasion and to rubber marks never before achieved by waterborne products so it is even recommended for use on heavy duty flooring (in salons, shops, etc.). If it is applied directly without a sealer, it brightens up the colour of the wood quite considerably, without leading to yellowing over time.

Single component moisture-cure silane-terminated adhesive that does not contain water, solvents, isocyanates, epoxy or amino compounds and for this reason does not bear any health or risk warnings or symbols. The EC1 PLUS classification certifies the very low emission of volatile organic compounds both when being applied and once the floor is in use. Being certified EMICODE EC1PLUS, ZEROMONO may apply for the awarding of the EQ credit for Indoor Environmental Quality – Low-Emitting Materials of the new international certification standard LEED v4.